Sales Tel: +63 945 7983492  |  Email Us    
SMDC Residences

Air Residences

Features and Amenities

Reflective Pool
Function Terrace
Seating Alcoves

Air Residences

Green 2 Residences

Features and Amenities:

Wifi ready study area
Swimming Pool
Gym and Function Room

Green 2 Residences

Bloom Residences

Features and Amenities:

Recreational Area
2 Lap Pools
Ground Floor Commercial Areas

Bloom Residences

Leaf Residences

Features and Amenities:

3 Swimming Pools
Gym and Fitness Center
Outdoor Basketball Court

Leaf Residences

Contact Us

Contact us today for a no obligation quotation:


+63 945 7983492
+63 908 8820391

Copyright © 2018 SMDC :: SM Residences, All Rights Reserved.


































































000-374 dumps with Real exam Questions and Practice Test - smresidences.com.ph

Great Place to download 100% free 000-374 braindumps, real exam questions and practice test with VCE exam simulator to ensure your 100% success in the 000-374 - smresidences.com.ph

Pass4sure 000-374 dumps | Killexams.com 000-374 real questions | http://smresidences.com.ph/

000-374 IBM WebSphere MQ V7.0 System Administration

Study Guide Prepared by Killexams.com IBM Dumps Experts


Killexams.com 000-374 Dumps and Real Questions

100% Real Questions - Exam Pass Guarantee with High Marks - Just Memorize the Answers



000-374 exam Dumps Source : IBM WebSphere MQ V7.0 System Administration

Test Code : 000-374
Test Name : IBM WebSphere MQ V7.0 System Administration
Vendor Name : IBM
: 111 Real Questions

it is unbelieveable questions for 000-374 take a look at.
Yes, very beneficial and I become able to score 82% within the 000-374 exam with 5 days preparation. Especially the ability of downloading as PDF files in your package deal gave me a very good room for powerful practice coupled with online tests - no restricted attempts limit. Answers given to each question by using you is one hundred% correct. Thanks lots.


where can i down load 000-374 trendy dumps?
Yes, the question bank is very useful and I recommend it to everyone who wishes to take these exams. Congrats on a job well thought out and executed. I cleared my 000-374 exams.


Do you need real exam questions modern-day 000-374 exam to pass the examination?
As a assured authority, I knew I need to take help from Dumps at the off hazard that I want to clear the extremeexam like 000-374. Moreover i used to be correct. The killexams.com Dumps have an interesting technique to make the difficultsubjects easy. They manage them in quick, clean and particular way. Straight forward and recollect them. I did so and could answer all of the questions in half of time. Incredible, killexams.com dumpss a right companion in need.


keep in mind to get these state-of-the-art brain dumps questions for 000-374 exam.
My pals instructed me I could anticipate killexams.com for 000-374 exam preparation, and this time I did. The braindumps are very handy to apply, i like how they may be set up. The query order facilitates you memorize things higher. I passed with 89% marks.


Nice to hear that real exam questions of 000-374 exam are available.
before discovering this high-quality killexams.com, i used to be genuinely certain approximately competencies of the net. as soon as I made an account right here I noticed a whole new international and that become the beginning of my successful streak. so that you can get absolutely organized for my 000-374 test, i was given a number of examine questions / answers and a set sample to follow which became very precise and comprehensive. This assisted me in achieving achievement in my 000-374 test which become an super feat. thank you plenty for that.


am i able to find real exam Q & A of 000-374 exam?
I am saying from my revel in that in case you remedy the query papers separately then you may truely crack the exam. killexams.com has very powerful examine material. Such a very beneficial and helpful website. Thanks Team killexams.


What take a look at guide do I need to prepare to clean 000-374 examination?
I was in a hurry to pass the 000-374 exam because I had to submit my 000-374 certificate. I should try to look for some online help regarding my 000-374 test so I started searching. I discovered this killexams.com and was so hooked that I forgot what I was doing. In the end it was not in vain since this killexams.com got me to pass my test.


It turned into extremely good to have real exam questions present day 000-374 exam.
I knew that I had to cleared my 000-374 exam to keep my activity in current agency and it changed into no longer smoothactivity without some assist. It became just amazing for me to research a lot from killexams.com preparation % in form of 000-374 questions answers and exam simulator. Now I proud to announce that i am 000-374 certified. exceptional workkillexams.


No less expensive source than those 000-374 dumps available but.
I almost misplaced recall in me inside the wake of falling flat the 000-374 exam.I scored 87% and cleared this exam. A bargain obliged killexams.com for convalescing my actuality. Subjects in 000-374 had been definitely difficult for me to get it. I almost surrendered the plan to take this exam over again. Besides because of my companion who prescribed me to use killexams.com Questions & answers. Internal a compass of smooth four weeks i was honestly organized for this exam.


I need present day dumps modern-day 000-374 examination.
As I had one and handiest week nearby before the exam 000-374. So, I trusted upon the of killexams.com for quick reference. It contained short-length replies in a systemic manner. Big way to you, you exchange my international. That is the exceptional exam solution in the event that i have restricted time.


IBM IBM WebSphere MQ V7.0

An Introduction to IBM WebSphere MQ & the way to set up In Ubuntu 16.04 LTS | killexams.com Real Questions and Pass4sure dumps

IBM WebSphere MQ

IBM WebSphere MQ is a Messaging platform which is used through many corporations as their messaging spine. It comes under the IBM WebSphere family unit. It sends messages throughout networks of a variety of add-ons. functions connects to IBM WebSphere MQ to ship or receive a message. IBM WebSphere MQ handles the diverse processors, operating programs, subsystems, and communication protocols it encounters in transferring the message. If a connection or a processor is temporarily unavailable, IBM WebSphere MQ queues the message and forwards it when the connection is again on-line. An software has a call of programming interfaces, and programming languages to connect to IBM WebSphere MQ.

To set up IBM MQ to your Ubuntu 16.04 installing first you need to download the IBM WebSphere MQ from beneath link.

opt for the Developer equipment and decide a edition due to the fact they are going to setup and test it on their native laptop. choose v8 after which Linux.

https://developer.ibm.com/messaging/mq-downloads/

IBM WebSphere MQ download page

Now you're able to installation follow below steps to installation the product.

Step 1,

First open a terminal. Then they have to installation “rpm” package to installation needed components due to the fact IBM is offering rpm packages. Run here command to install “rpm”

sudo apt install rpm Step 2,

Now they need to check if there is a user named “mqm” is already created within the local computing device. To do that run below command at terminal.

getent passwd | grep mqm

If it does not supply any output then all is nice go to subsequent step now. or If it gives an output comparable to this “mqm:x:1001:1001:,,,:/domestic/mqm:/bin/bash” then you already have a consumer created through the identify “mqm”. in case you need to delete this person and have a sparkling installation then you should delete this consumer. To do that use this command.

sudo deluser --get rid of-domestic mqm

Step three,

We need to add a non-root consumer by way of name “mqm” to deploy and use IBM WebSphere MQ. To do this run this command.

sudo adduser mqm

Then do as follows,

sudo adduser mqm[sudo] password for root: including user `mqm' …including new community `mqm' (1002) …including new consumer `mqm' (1002) with group `mqm' …developing domestic directory `/domestic/mqm' …Copying files from `/etc/skel’ …Enter new UNIX password: Retype new UNIX password: passwd: password up to date successfullyChanging the person guidance for mqmEnter the new cost, or press ENTER for the defaultFull identify []: Room number []: Work cell []: home cell []: different []: Is the assistance relevant? [Y/n] Y Step 4,

Now they should examine even if the user “mqm” is within the “mqm” neighborhood which is critical. To do this run below command.

agencies mqm

it can gave an output akin to this “mqm : mqm”

Step 5,

Lets go to the location where they now have downloaded the IBM WebSphere MQ file and extract it anyplace you desires to installation. you could do this using GUI or terminal as smartly. when you are the usage of the terminal then comply with this command with the relevant parameters.

tar -xzf mqadv_dev80_linux_x86-64.tar.gz -C /PATH_TO_DIR_TO_EXTRACT

Then go to that region. the use of “cd” command.

cd /PATH_TO_DIR_TO_EXTRACT/MQServer Step 6,

Then they have to run beneath commands to installation IBM WebSphere MQ. Please observe that “suffix” in beneath commands may also be any identify. it's a folder name which we're going to create. as an example: sudo ./crtmqpkg suffix will also be sudo ./crtmqpkg WhatEverName then this should still be changed as well to that corosponding name cd /var/tmp/mq_rpms/WhatEverName/x86_64

sudo ./mqlicense.sh -text_onlysudo ./crtmqpkg suffixcd /var/tmp/mq_rpms/suffix/x86_64sudo rpm -ivh --drive-debian --ignorearch MQSeries*.rpm

Now to grant entry to every person use under command.

xhost + Step 7,

Congratulations… ! Now you have got installed IBM WebSphere MQ. To run it do as follows.

sudo su - mqmcd /opt/mqm/bin./MQExplorer IBM MQ beginning

If there's any subject in installation IBM MQ suppose free to comment. And expect extra on the usage of it.

Reference:
  • https://www.ibm.com/help/knowledgecenter/en/SSFKSJ_9.0.0/com.ibm.mq.ins.doc/q115250_.htm
  • 2. https://www.ibm.com/guide/knowledgecenter/en/SSFKSJ_7.5.0/com.ibm.mq.seasoned.doc/q001020_.htm


    IBM and Microsoft to offer more desirable option within the hybrid cloud | killexams.com Real Questions and Pass4sure dumps

    ARMONK, ny and REDMOND, WA — October 22, 2014 — IBM and Microsoft introduced nowadays that they are working together to provide their respective business utility on Microsoft Azure and IBM Cloud. As adoption of hybrid cloud computing accelerates, this relationship will give customers, partners and builders greater choice in the cloud, assisting them pressure new business alternatives, spur innovation and in the reduction of prices.

    in particular, the newly announced relationship provides here customer advantages:

  • IBM and Microsoft will make key IBM middleware comparable to WebSphere Liberty, MQ, and DB2 available on Microsoft Azure.
  • windows Server and SQL Server could be offered on IBM Cloud.
  • IBM and Microsoft are working together to convey a Microsoft .internet runtime for IBM’s Bluemix cloud development platform.
  • To assist hybrid cloud deployments, IBM will expand help of its application operating on windows Server Hyper-V, and the groups plan to make IBM Pure application provider purchasable on Azure.
  • “collectively we're growing new alternatives to force innovation in hybrid cloud,” talked about Robert LeBlanc, Senior vp, software and Cloud solutions group, IBM. “This settlement reinforces IBM’s method in providing open cloud know-how for the commercial enterprise. purchasers will now gain unheard of access to IBM’s leading middleware and should have a good more desirable level of alternative over the tools that they use to construct and installation their cloud environments.”

    “Microsoft is dedicated to helping enterprise purchasers know the massive merits of cloud computing across their personal programs, accomplice clouds and Microsoft Azure,” talked about Scott Guthrie, government vice president, Cloud and commercial enterprise, Microsoft. “With this settlement extra purchasers can be able to take knowledge of the hyper-scale, commercial enterprise efficiency and hybrid capabilities of Azure.”

    IBM and Microsoft will make key products inside IBM’s enterprise-confirmed middleware utility portfolio, including WebSphere utility Server, WebSphere MQ and DB2 database software, purchasable in the Microsoft Azure digital Machines provider for construction and creation deployment.

    Microsoft and IBM are working collectively to supply .internet runtimes, along with principal tooling, in IBM Bluemix, IBM’s open cloud platform-as-a-service. This may open the door for millions of .net builders to build functions at scale for purchasers on IBM’s cloud platform. The businesses will start with a restrained preview offering of .net working inside Bluemix.

    The companies will allow purchasers to deliver their own application licenses to the IBM and Microsoft clouds, assisting valued clientele prevent further cost. Microsoft will also present IBM middleware software licenses, reminiscent of WebSphere Liberty, MQ and DB2, to Azure consumers with pay-per-use pricing.

    The organizations also plan to make IBM Pure software provider attainable on both Microsoft Azure and IBM SoftLayer for computerized deployment, configuration and license management in a hybrid cloud ambiance.

    IBM SoftLayer at present offers and supports a wide range of Microsoft application, including windows Server, Hyper-V, WebMatrix, windows Firewall, SQL Server and others.

    About Microsoft

    founded in 1975, Microsoft (Nasdaq “MSFT”) is the international leader in software, services, devices and options that support americans and organizations recognize their full potential.

    About IBM Cloud Computing

    IBM is a world leader in cloud with a extensive portfolio of open cloud options to allow consumers for the hybrid cloud period with integration, control over data and abilities. due to the fact the $2 billion acquisition of SoftLayer, IBM has continued to make giant investments in building out a complete cloud portfolio together with $1.2 billion to extend its international footprint to forty statistics centers and $1 billion investment to set up Bluemix, a cloud platform-as-a-carrier on Cloud Foundry, to assist thousands and thousands of builders. IBM Cloud has helped greater than 30,000 consumers all over the world. these days, IBM has 100+ cloud SaaS solutions, thousands of consultants with deep industry talents helping valued clientele radically change and a growing international network of facts centers. considering the fact that 2007, IBM has invested more than $7 billion in 17 acquisitions to speed up its cloud initiatives. IBM holds 1,560 cloud patents concentrated on riding innovation. basically, IBM for the 21st consecutive 12 months topped the annual list of US patent leaders. IBM procedures more the 5.5M customer transactions day by day through IBM’s public cloud. For extra assistance about cloud choices from IBM, seek advice from http://www.ibm.com/cloud. follow us on Twitter at @IBMcloud and on their blog at www.thoughtsoncloud.com. be a part of the conversation #ibmcloud.


    IBM Expands assist in updated WebSphere MQ | killexams.com Real Questions and Pass4sure dumps

    First name: closing identify: e-mail tackle: Password: ascertain Password: Username:

    Title: C-degree/President manager VP team of workers (affiliate/Analyst/and so on.) Director

    feature:

    function in IT choice-making procedure: Align company & IT desires Create IT approach verify IT wants manage seller Relationships consider/Specify brands or companies different role Authorize Purchases no longer concerned

    Work phone: company: company size: trade: road tackle city: Zip/postal code State/Province: country:

    from time to time, they send subscribers particular presents from select companions. Would you like to acquire these particular companion offers by the use of e mail? sure No

    Your registration with Eweek will consist of right here free e-mail e-newsletter(s): information & Views

    by way of submitting your instant number, you agree that eWEEK, its related houses, and seller partners offering content material you view may also contact you using contact middle know-how. Your consent is not required to view content material or use web site aspects.

    through clicking on the "Register" button beneath, I agree that I even have carefully study the terms of provider and the privacy coverage and that i agree to be legally bound by using all such phrases.

    Register

    proceed without consent      

    While it is hard errand to pick solid certification questions/answers assets regarding review, reputation and validity since individuals get sham because of picking incorrectly benefit. Killexams.com ensure to serve its customers best to its assets as for exam dumps update and validity. The greater part of other's sham report objection customers come to us for the brain dumps and pass their exams cheerfully and effortlessly. They never bargain on their review, reputation and quality because killexams review, killexams reputation and killexams customer certainty is imperative to us. Extraordinarily they deal with killexams.com review, killexams.com reputation, killexams.com sham report grievance, killexams.com trust, killexams.com validity, killexams.com report and killexams.com scam. On the off chance that you see any false report posted by their rivals with the name killexams sham report grievance web, killexams.com sham report, killexams.com scam, killexams.com protestation or something like this, simply remember there are constantly terrible individuals harming reputation of good administrations because of their advantages. There are a great many fulfilled clients that pass their exams utilizing killexams.com brain dumps, killexams PDF questions, killexams questions, killexams exam simulator. Visit Killexams.com, their example questions and test brain dumps, their exam simulator and you will realize that killexams.com is the best brain dumps site.

    Back to Braindumps Menu


    000-M74 braindumps | CABM study guide | 9A0-092 VCE | 200-530 questions and answers | 9A0-056 exam prep | HP2-N29 examcollection | NREMT-NRP pdf download | PMBOK-5th dumps questions | 156-915-80 test prep | 00M-237 free pdf | 000-253 real questions | 000-215 free pdf | 210-060 Practice test | 6002 sample test | 1Z0-052 exam questions | NCLEX braindumps | 000-559 study guide | 3600-1 brain dumps | 102-350 practice questions | 000-914 exam prep |


    Just study these IBM 000-374 Questions and Pass the real test
    killexams.com exam braindumps offers all of you that you need to take certification exam. Their IBM 000-374 Exam will provide you with exam questions with confirmed answers that replicate the real exam. They at killexams.com are made plans to empower you to pass your 000-374 exam with excessive ratings.

    The solely thanks to get success within the IBM 000-374 exam is that you just ought to acquire reliable preparation dumps. they have an approach to guarantee that killexams.com is the most direct pathway towards IBM IBM WebSphere MQ V7.0 System Administration test. you will be victorious with full confidence. you will be able to read free questions at killexams.com before you purchase the 000-374 exam dumps. Their simulated tests are in multiple-choice and are similar to real test pattern. The Study guide Questions and Answers created by the certified professionals. they supply you with the expertise of taking the important exam. 100% guarantee to pass the 000-374 actual exam. killexams.com Discount Coupons and Promo Codes are as under; WC2017 : 60% Discount Coupon for all exams on website PROF17 : 10% Discount Coupon for Orders larger than $69 DEAL17 : 15% Discount Coupon for Orders larger than $99 SEPSPECIAL : 10% Special Discount Coupon for All Orders Click http://killexams.com/pass4sure/exam-detail/000-374

    killexams.com have their specialists Team to guarantee their IBM 000-374 exam questions are reliably the most updated. They are at the entire exceptionally acquainted with the exams and testing awareness.

    How killexams.com keep up IBM 000-374 exams updated?: they have their phenomenal methods to realize the most extreme late exams insights on IBM 000-374. Presently after which they contact their associates who're particularly calm with the exam simulator acknowledgment or sometimes their clients will email us the latest update, or they were given the most current update from their dumps bearers. When they find the IBM 000-374 exams changed then they update them ASAP.

    On the off prep that you sincerely come up speedy this 000-374 IBM WebSphere MQ V7.0 System Administration and might pick never again to sit tight for the updates then they will give you full refund. notwithstanding, you ought to send your score answer to us with the objective that they will have an exam. They will give you full refund brisk during their working time when they get the IBM 000-374 score archive from you.

    IBM 000-374 IBM WebSphere MQ V7.0 System Administration Product Demo?: they have both PDF version and Testing Software. You can examin their item site page to see what no doubt like.

    Exactly when will I get my 000-374 fabric once I pay?: Generally, After effective installment, your username/password are sent at your email adapt to inside 5 min. It might likewise take minimal longer on the off chance that your answers delay in control approval.

    killexams.com Huge Discount Coupons and Promo Codes are as under;
    WC2017: 60% Discount Coupon for all exams on website
    PROF17: 10% Discount Coupon for Orders greater than $69
    DEAL17: 15% Discount Coupon for Orders greater than $99
    DECSPECIAL: 10% Special Discount Coupon for All Orders


    000-374 | 000-374 | 000-374 | 000-374 | 000-374 | 000-374


    Killexams HP2-B84 VCE | Killexams 000-223 questions and answers | Killexams 00M-667 mock exam | Killexams EX0-105 free pdf | Killexams P2070-092 free pdf | Killexams 70-347 real questions | Killexams 000-665 free pdf | Killexams HP0-045 Practice Test | Killexams 1Z0-216 real questions | Killexams 2B0-020 study guide | Killexams EX0-115 study guide | Killexams HP2-B85 test questions | Killexams JN0-210 questions answers | Killexams 9L0-064 practice test | Killexams HP0-743 test prep | Killexams 3104 braindumps | Killexams C5050-408 test prep | Killexams A00-206 cram | Killexams HP2-Z18 practice questions | Killexams 9A0-125 practice exam |


    killexams.com huge List of Exam Braindumps

    View Complete list of Killexams.com Brain dumps


    Killexams 650-377 pdf download | Killexams CPP real questions | Killexams 2B0-102 braindumps | Killexams BAGUILD-CBA-LVL1-100 dump | Killexams MSC-241 dumps questions | Killexams CAT-020 free pdf download | Killexams 920-332 questions and answers | Killexams 000-299 Practice Test | Killexams 7591X brain dumps | Killexams C2160-667 Practice test | Killexams 000-R13 free pdf | Killexams 000-233 study guide | Killexams HAT-050 mock exam | Killexams HP0-766 practice test | Killexams CAT-240 exam questions | Killexams 1Z0-526 braindumps | Killexams CMA practice questions | Killexams HP0-J12 examcollection | Killexams BH0-012 study guide | Killexams 700-301 dumps |


    IBM WebSphere MQ V7.0 System Administration

    Pass 4 sure 000-374 dumps | Killexams.com 000-374 real questions | http://smresidences.com.ph/

    Oracle® Database | killexams.com real questions and Pass4sure dumps

    Client Quick Installation Guide

    10g Release 2 (10.2) for AIX 5L Based Systems (64-Bit)

    B19078-02

    November 2005

    This guide describes how to quickly install products available on the Oracle Database Client 10g for AIX 5L Based Systems (64-Bit). It contains the following sections:

  • Reviewing Information About this Guide

  • Logging In to the System as root

  • Checking the Hardware Requirements

  • Checking the Software Requirements

  • Creating Required Operating System Group and User

  • Creating an Oracle Base Directory

  • Configuring the oracle User's Environment

  • Mounting the Product Disc

  • Installing Oracle Database Client

  • What to Do Next?

  • Documentation Accessibility

  • 1 Reviewing Information About this Guide

    Note:

    This guide describes how to install Oracle Client on a system that does not have any Oracle software installed on it. If there is an existing Oracle software installation on this system, then refer to Oracle Database Client Installation Guide for AIX 5L Based Systems (64-Bit) for more detailed installation instructions.

    This guide describes how to complete a default installation of Oracle Database Client on a system that does not have any Oracle software installed on it. It describes how to install one of the following installation types:

  • Administrator: Enables applications to connect to an Oracle Database instance on the local system or on a remote system. It also provides tools that enable you to administer Oracle Database.

  • Runtime: Enables applications to connect to an Oracle Database instance on the local system or on a remote system.

  • Instant Client: Enables you to install only the shared libraries required by Oracle Call Interface (OCI), Oracle C++ Call Interface (OCCI), Pro*C, or Java database connectivity (JDBC) OCI applications. This installation type requires much less disk space as compared to the other Oracle Database Client installation types.

  • See Also:

    Oracle Call Interface Programmer's Guide for more information about the Instant Client feature

    This guide does not describe how to install the Custom installation type.

    Where to Get Additional Installation Information

    For more detailed information about installing Oracle Database Client, refer to Oracle Database Client Installation Guide for AIX 5L Based Systems (64-Bit).

    This guide is available on the product disc. To access it, use a Web browser to open the welcome.htm file located in the top-level directory of the installation media, and then select the Documentation tab.

    2 Logging In to the System as root

    Before you install Oracle Database Client, you must complete several tasks as the root user. To log in as the root user, complete one of the following procedures:

    Note:

    You must install the software from an X Window System workstation, an X terminal, or a PC or other system with X server software installed.
  • If you are installing the software from an X Window System workstation or X terminal, then:

  • Start a local terminal session, for example, an X terminal (xterm).

  • If you are not installing the software on the local system, then enter the following command to enable the remote host to display X applications on the local X server:

    $ xhost fully_qualified_remote_host_name

    For example:

    $ xhost somehost.us.acme.com
  • If you are not installing the software on the local system, then use the ssh, rlogin, or telnet command to connect to the system where you want to install the software:

    $ telnet fully_qualified_remote_host_name
  • If you are not logged in as the root user, then enter the following command to switch user to root:

    $ su - root password: #
  • If you are installing the software from a PC or other system with X server software installed, then:

    Note:

    If necessary, refer to your X server documentation for more information about completing this procedure. Depending on the X server software that you are using, you may need to complete the tasks in a different order.
  • Start the X server software.

  • Configure the security settings of the X server software to permit remote hosts to display X applications on the local system.

  • Connect to the remote system where you want to install the software and start a terminal session on that system, for example, an X terminal (xterm).

  • If you are not logged in as the root user on the remote system, then enter the following command to switch user to root:

    $ su - root password: #
  • 3 Checking the Hardware Requirements

    The system must meet the following minimum hardware requirements:

  • At least 256 MB of physical RAM

  • The following table describes the relationship between installed RAM and the configured swap space requirement.

    RAM Swap Space Up to 256 MB 3 times the size of RAM Between 257 MB and 512 MB 2 times the size of RAM Between 513 MB and 726 MB 1.5 times the size of RAM More than 726 MB 0.75 times the size of RAM
  • The minimum client install TEMP space required is 115 MB. The minimum disk space requirement in the /tmp directory depends on the installation type you have selected. The following table lists the minimum disk space requirements for the /tmp directory in each type of installation.

    Client Installation Type Disk Space Required for the /tmp Directory (MB) Instant 120 Admin 835 Runtime 470 Custom (all components selected) 765
  • Between 34 MB and 1.9 GB of disk space for the Oracle software, depending on the installation type

  • To ensure that the system meets these requirements, follow these steps:

  • To determine the physical RAM size, enter the following command:

    # /usr/sbin/lsattr -E -l sys0 -a realmem

    If the size of the physical RAM installed in the system is less than the specified value, then you must install more memory before continuing.

  • To determine the size of the configured swap space, enter the following command:

    # /usr/sbin/lsps -a

    If necessary, refer to your operating system documentation for information about how to configure additional swap space.

  • To determine the amount of free disk space available in the /tmp directory, enter the following command:

    # df -k /tmp

    If there is less than 400 MB of disk space available in the /tmp directory, then complete one of the following steps:

  • Delete unnecessary files from the /tmp directory to meet the disk space requirement.

  • Set the TMP and TMPDIR environment variables when setting the oracle user's environment (described later).

  • Extend the file system that contains the /tmp directory. If necessary, contact your system administrator for information about extending file systems.

  • To determine the amount of free disk space available on the system, enter the following command:

    # df -k

    This command displays the disk space usage on all mounted file systems. You must identify a file system with sufficient disk space.

    The following table shows the approximate disk space requirements for software files for each installation type:

    Installation Type Requirement for Software Files Instant Client 130 MB Administrator 2.7 GB Runtime 1.8 GB Custom (maximum) 3 GB

    Note:

    If you want to configure only the Instant Client Light component of Instant Client, you need 34 MB of disk space to store the related files.
  • To determine whether the system architecture can run the software, enter the following command:

    # /usr/bin/getconf HARDWARE_BITMODE

    This command should return the following output:

    64

    If you do not see the expected output, then you cannot install the software on this system.

  • 4 Checking the Software Requirements

    The system must meet the following minimum software requirements.

  • The operating system versions and maintenance levels must be AIX 5L version 5.2, Maintenance Level 04 or later , or AIX 5L version 5.3, Maintenance Level 02 or later.

  • The following operating system filesets are required:

  • For the Oracle products that you want to install, the system must meet the following product-specific requirements:

  • OC Systems PowerAda 5.3

  • Oracle JDBC/OCI Drivers

    You can use the following optional IBM JDK versions with the Oracle JDBC/OCI drivers, however, they are not required for the installation:

  • JDK 1.4.2 (64-bit)

  • JDK 1.3.1.11 (32-bit)

  • JDK 1.2.2.18

  • IBM JDK 1.4.2 (32-bit) is installed with this release.

  • Pro*C/C++, Oracle Call Interface, Oracle C++ Call Interface, Oracle XML Developer's Kit (XDK), GNU Compiler Collection (GCC):

    Note:

    Note: If you do not install install the IBM XL C/C++ Enterprise Edition V7.0 compiler, you need to install the IBM XL C/C++ Enterprise Edition V7.0 for AIX Runtime Environment Component. The runtime environment file sets can be downloaded with no license requirements from the following link:

    http://www-1.ibm.com/support/docview.wss?uid=swg24009788

  • Pro*COBOL

  • Pro*FORTRAN

    IBM XL Fortran V9.1

  • SQL*Module for Ada

    OC Systems PowerAda 5.3 or later

  • To ensure that the system meets these requirements:

  • To determine which version of the operating system is installed, enter the following command:

    # oslevel -r

    If the operating system version is lower than AIX 5.2.0.0 Maintenance Level 04 (5200-04), then upgrade your operating system to this level. AIX 5L version 5.2 maintenance packages are available from the following Web site:

    http://www-912.ibm.com/eserver/support/fixes/

  • To determine whether the required filesets are installed and committed, enter a command similar to the following:

    # lslpp -l bos.adt.base bos.adt.lib bos.adt.libm bos.perf.perfstat bos.perf.libperfstat bos.perf.proctools

    If a fileset is not installed and committed, then install it. Refer to your operating system or software documentation for information about installing filesets.

  • In addition, you need to verify that the following patches are installed on the system. The procedure following the table describes how to check these requirements.

    Note:

    There may be more recent versions of the patches listed installed on the system. If a listed patch is not installed, then determine whether a more recent version is installed before installing the version listed.
  • For all installations on AIX, the following patches are required:

    Authorized Problem Analysis Reports (APARs) for AIX 5L v5.2 ML 04:

  • IY63133: large percentage of CPU time spent in ldata_balance routine

  • IY64978: deadlock with concurrent renaming and unlinking under JFS

  • IY63366: dlsym returns null even for valid symbol in AIX520 ML-4

  • IY64691: chvg -b can cause corruption and crash

  • IY64737: AIO can hang in knotunlock

  • IY65001: mklvcopy on a striped lv is failing to update lvcb

  • For Pro*C/C++, Oracle Call Interface, Oracle C++ Call Interface, or Oracle XML Developer's Kit (XDK)

    May 2005 XL C/C++ Enterprise Edition V7.0 for AIX PTF (7.0.0.2):

  • IY64361: Exception in putdiag_no_handler() when -O is specified

  • IY65361: May 2005 XL C Enterprise Edition V7.0 for AIX PTF

  • IY65362: MAY 2005 XL C/C++ Enterprise Edition V7 for AIX

  • Oracle JDBC/OCI Drivers

    Note: These APARs are required only if you are using the associated JDK version.

    APAR required for JDK 1.4.2 (64-bit):

    IY63533: DK 1.4.2 64-bit SR1 caix64142-20040917

    APARs required for JDK 1.3.1.11 (32-bit):

    IY58350: SDK 1.3.1 32-BIT SR7P : CA131IFX-20040721A

    IY65305: JAVA142 32-BIT PTF : CA142IFX-20041203

    APAR required for JDK 1.2.2.18:

    IY40034: SDK 1.2.2 PTF: CA122-20030115

  • To ensure that the system meets these requirements:

  • To determine whether an APAR is installed, enter a command similar to the following:

    # /usr/sbin/instfix -i -k "IY63133 IY64978 IY63366 IY64691 IY65001 \ IY64361 IY65305"

    If an APAR is not installed, then download it from the following Web site and install it:

    http://www-912.ibm.com/eserver/support/fixes/

  • If you require a CSD for WebSphere MQ, then refer to the following Web site for download and installation information:

    http://www.ibm.com/software/integration/mqfamily/support/summary/aix.html

  • 5 Creating Required Operating System Group and User

    The following local operating system group and user must exist on the system:

    To determine if this group and user already exist, and if required, to create them, follow these steps:

  • To determine if the oinstall group exists, enter the following command:

    # more /etc/oraInst.loc

    If the output of this command shows the oinstall group name, then the group already exists.

    If the oraInst.loc file exists, then the output from this command is similar to the following:

    inventory_loc=/u01/app/oracle/oraInventory inst_group=oinstall

    The inst_group parameter shows the name of the Oracle Inventory group (oinstall).

  • If the oraInst.loc file does not exist, then create the Oracle Inventory group by using the following procedure:

  • Enter the following command:

    smit security
  • Choose the appropriate menu items to create the oinstall group.

  • Press F10 to exit.

  • To determine whether the oracle user exists and belongs to the correct groups, enter the following command:

    # id oracle

    If the oracle user exists, then this command displays information about the groups to which the user belongs. The output should be similar to the following, indicating that oinstall is the primary group:

    uid=440(oracle) gid=200(oinstall) groups=201(dba),202(oper)
  • To modify or create the Oracle software owner user:

  • Enter the following command:

    # smit security
  • Choose the appropriate menu items to modify or create the oracle user.

  • In the Primary GROUP field, specify the Oracle Inventory group, for example oinstall.

  • In the Group SET field, specify any required secondary groups.

  • Press F10 to exit.

  • Enter the following command to set the password of the oracle user:

    # passwd oracle
  • 6 Creating an Oracle Base Directory

    Create an Oracle base directory with a name similar to the following, and specify the correct owner, group, and permissions for it:

    /u01/app/oracle

    The Optimal Flexible Architecture (OFA) guidelines recommend that you use a path similar to the following for the Oracle base directory:

    /mount_point/app/oracle_sw_owner

    To determine where to create this directory:

  • Enter the following command to display information about all mounted file systems:

    # df -h

    This command displays information about all of the file systems mounted on the system, including:

  • The physical device name

  • The total amount, used amount, and available amount of disk space

  • The mount point directory for that file system

  • From the display, identify a file system that has sufficient disk space.

  • Note the name of the mount point directory for the file system that you identified.

  • To create the required directory and specify the correct owner, group, and permissions for it, follow these steps:

    Note:

    In the following procedure, replace /u01 with the appropriate mount point directory that you identified in Step 3 previously.
  • Enter the following command to create subdirectories in the mount point directory that you identified for the Oracle base directory:

    # mkdir -p /u01/app/oracle
  • Change the owner and group of the directory that you created to the oracle user and the oinstall group:

    # chown -R oracle:oinstall /u01/app/oracle
  • Change the permissions on the directory that you created to 775:

    # chmod -R 775 /u01/app/oracle
  • When you configure the oracle user's environment later during the installation, set the ORACLE_BASE environment variable to specify the Oracle base directory that you have created.

    7 Configuring the oracle User's Environment

    You run Oracle Universal Installer from the oracle account. However, before you start Oracle Universal Installer, you must configure the environment of the oracle user. To configure the environment, you must:

    To set the oracle user's environment:

  • Start a new terminal session, for example, an X terminal (xterm).

  • Enter the following command to ensure that X Window applications can display on this system:

    $ xhost fully_qualified_remote_host_name
  • Complete one of the following steps:

  • If the terminal session is not connected to the system where you want to install the software, then log in to that system as the oracle user.

  • If the terminal session is connected to the system where you want to install the software, then switch user to oracle:

    $ su - oracle
  • To determine the default shell for the oracle user, enter the following command:

    $ echo $SHELL
  • Open the oracle user's shell startup file in any text editor:

  • C shell (csh or tcsh):

    % vi .login
  • Enter or edit the following line in the shell startup file, specifying a value of 022 for the default file mode creation mask:

    umask 022
  • If the ORACLE_SID, ORACLE_HOME, or ORACLE_BASE environment variable is set in the file, then remove the corresponding lines from the file.

  • Save the file, and exit from the editor.

  • Add one of the following lines to the file to set the AIXTHREAD_SCOPE environment variable to S (system-wide thread scope):

  • Bourne shell (sh), Bash shell (bash), or Korn shell (ksh):

    AIXTHREAD_SCOPE=S; export AIXTHREAD_SCOPE
  • C shell (csh or tcsh):

    setenv AIXTHREAD_SCOPE S
  • To run the shell startup script, enter the following command:

  • If you determined that the /tmp directory has less than 400 MB of free disk space, then identify a file system with at least 400 MB of free space and set the TMP and TMPDIR environment variables to specify a temporary directory on this file system:

  • Use the df -k command to identify a suitable file system with sufficient free space.

  • If necessary, enter commands similar to the following to create a temporary directory on the file system that you identified, and set the appropriate permissions on the directory:

    $ su - root # mkdir /mount_point/tmp # chmod a+wr /mount_point/tmp # exit
  • Enter commands similar to the following to set the TMP and TMPDIR environment variables:

  • Bourne, Bash, or Korn shell:

    $ TMP=/mount_point/tmp $ TMPDIR=/mount_point/tmp $ export TMP TMPDIR
  • C shell:

    % setenv TMP /mount_point/tmp % setenv TMPDIR /mount_point/tmp
  • If you are not installing the software on the local system, then enter a command similar to the following to direct X applications to display on the local system:

  • Bourne, Bash, or Korn shell:

    $ DISPLAY=local_host:0.0 ; export DISPLAY
  • C shell:

    % setenv DISPLAY local_host:0.0
  • In this example, local_host is the host name or IP address of the system that you want to use to display Oracle Universal Installer (your workstation or PC).

  • Enter commands similar to the following to set the ORACLE_BASEand ORACLE_SID environment variables:

  • Bourne, Bash, or Korn shell:

    $ ORACLE_BASE=/u01/app/oracle $ ORACLE_SID=sales $ export ORACLE_BASE ORACLE_SID
  • C shell:

    % setenv ORACLE_BASE /u01/app/oracle % setenv ORACLE_SID sales
  • In these examples, /u01/app/oracle is the Oracle base directory that you created earlier.

  • Enter the following commands to ensure that the ORACLE_HOME and TNS_ADMIN environment variables are not set:

  • Bourne, Bash, or Korn shell:

    $ unset ORACLE_HOME $ unset TNS_ADMIN
  • C shell:

    % unsetenv ORACLE_HOME % unsetenv TNS_ADMIN
  • To verify that the environment has been set correctly, enter the following commands:

    $ umask $ env | more

    Verify that the umask command displays a value of 22, 022, or 0022 and the environment variables that you set in this section have the correct values.

  • 8 Mounting the Product Disc

    On most AIX systems, the product disc mounts automatically when you insert it into the drive. If the disc does not mount automatically, follow these steps to mount it:

  • Switch user to root:

    $ su - root
  • If necessary, enter a command similar to the following to eject the currently mounted disc, then remove it from the drive:

    # umount /dvd

    In this example, /dvd is the mount point directory for the disc drive.

  • Insert the disc into the disc drive, then enter a command similar to the following to mount it:

    # /usr/sbin/mount -rv cdrfs /dev/cd0 /dvd

    In this example, /dev/cd0 is the device name of the disc drive and /dvd is the mount point directory.

  • If Oracle Universal Installer displays the Disk Location dialog box, enter the disc mount point directory path, for example:

    /dvd
  • 9 Installing Oracle Database Client

    After configuring the oracle user's environment, start Oracle Universal Installer and install the Oracle software as follows:

  • To start Oracle Universal Installer, complete one of the following steps depending on the location of the installation files:

  • If the installation files are on disc, enter commands similar to the following, where directory_path is the path of the db directory on the DVD:

    $ cd /tmp $ /directory_path/runInstaller
  • If the installation files are on the hard disk, change directory to the db directory and enter the following command:

    $ ./runInstaller
  • If Oracle Universal Installer does not start, then refer to Oracle Database Client Installation Guide for AIX 5L Based Systems (64-Bit) for information about how to troubleshoot X display problems.

  • The following table describes the recommended action for each Oracle Universal Installer screen. Use the following guidelines to complete the installation:

  • If you need more assistance, or if you want to choose an option that is not a default, then click Help for additional information.

  • If you encounter errors while installing or linking the software, then refer to Oracle Database Client Installation Guide for AIX 5L Based Systems (64-Bit) for information about troubleshooting.

  • Note:

    If you have completed the tasks listed previously, then you can complete the installation by choosing the default values on most screens. Screen Recommended Action Select Installation Method The Basic Installation option is selected by default.

    Specify the directory path of the Oracle home. Ensure that the UNIX DBA group oinstall is selected. If you want to create a starter database, then specify a name and password for it. Then, click Next.

    Specify Inventory Directory and Credentials This screen is displayed only during the first installation of Oracle products on a system.

    Specify the full path of the Oracle Inventory directory. Ensure that the operating system group selected is oinstall. Then, click Next.

    Product-Specific Prerequisite Checks Verify that all of the prerequisite checks succeed, then click Next.

    Oracle Universal Installer checks the system to verify that it is configured correctly to run Oracle software. If you have completed all of the preinstallation steps in this guide, all of the checks should pass.

    If a check fails, then review the cause of the failure listed for that check on the screen. If possible, rectify the problem and rerun the check. Alternatively, if you are satisfied that your system meets the requirements, then you can select the check box for the failed check to manually verify the requirement.

    Summary Review the information displayed on this screen, and then click Install. Install This screen displays status information while the product is being installed. Configuration Assistants This screen displays status information for the configuration assistants that configure the software and create a database. When the message is displayed at the end of this process, click OK to continue. Execute Configuration Scripts When prompted, read the instructions and then run the scripts mentioned on this screen. Click OK to continue. End of Installation The configuration assistants configure several Web-based applications, including Oracle Enterprise Manager Database Control. This screen displays the URLs configured for these applications. Make a note of the URLs used. The port numbers used in these URLs are also recorded in the following file: oracle_home/install/portlist.ini

    To exit from Oracle Universal Installer, click Exit and then click Yes.

  • If you select Advanced Installation, then you will be prompted for the SYS, SYSTEM, SYSMAN, and DBSNMP passwords. Oracle recommends that you specify passwords that:

  • Are at least four characters long

  • Are not the same as the user names

  • Have at least one alphabetic, one numeric, and one punctuation mark character

  • Are not simple or obvious words, such as welcome, account, database, or user

  • If you chose an installation type that runs Database Configuration Assistant and Oracle Net Configuration Assistant (NetCA) in interactive mode, you must provide detailed information about configuring the database and network.

  • 10 What to Do Next?

    After you have successfully installed Oracle Client, refer to Oracle Database Client Installation Guide for AIX 5L Based Systems (64-Bit) for information about required and optional postnstallation steps.

    11 Documentation Accessibility

    Our goal is to make Oracle products, services, and supporting documentation accessible, with good usability, to the disabled community. To that end, their documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Accessibility standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that their documentation can be accessible to all of their customers. For more information, visit the Oracle Accessibility Program Web site at

    http://www.oracle.com/accessibility/

    Accessibility of Code Examples in Documentation

    Screen readers may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, some screen readers may not always read a line of text that consists solely of a bracket or brace.

    Accessibility of Links to External Web Sites in Documentation

    This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.

    TTY Access to Oracle Support Services

    Oracle provides dedicated Text Telephone (TTY) access to Oracle Support Services within the United States of America 24 hours a day, seven days a week. For TTY support, call 800.446.2398.

    Oracle Database Client Quick Installation Guide, 10g Release 2 (10.2) for AIX 5L Based Systems (64-Bit)

    B19078-02

    Copyright © 2005, Oracle. All rights reserved.

    The Programs (which include both the software and documentation) contain proprietary information; they are provided under a license agreement containing restrictions on use and disclosure and are also protected by copyright, patent, and other intellectual and industrial property laws. Reverse engineering, disassembly, or decompilation of the Programs, except to the extent required to obtain interoperability with other independently created software or as specified by law, is prohibited.

    The information contained in this document is subject to change without notice. If you find any problems in the documentation, please report them to us in writing. This document is not warranted to be error-free. Except as may be expressly permitted in your license agreement for these Programs, no part of these Programs may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose.

    If the Programs are delivered to the United States Government or anyone licensing or using the Programs on behalf of the United States Government, the following notice is applicable:

    U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the Programs, including documentation and technical data, shall be subject to the licensing restrictions set forth in the applicable Oracle license agreement, and, to the extent applicable, the additional rights set forth in FAR 52.227-19, Commercial Computer Software—Restricted Rights (June 1987). Oracle Corporation, 500 Oracle Parkway, Redwood City, CA 94065

    The Programs are not intended for use in any nuclear, aviation, mass transit, medical, or other inherently dangerous applications. It shall be the licensee's responsibility to take all appropriate fail-safe, backup, redundancy and other measures to ensure the safe use of such applications if the Programs are used for such purposes, and they disclaim liability for any damages caused by such use of the Programs.

    Oracle, JD Edwards, PeopleSoft, and Retek are registered trademarks of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

    The Programs may provide links to Web sites and access to content, products, and services from third parties. Oracle is not responsible for the availability of, or any content provided on, third-party Web sites. You bear all risks associated with the use of such content. If you choose to purchase any products or services from a third party, the relationship is directly between you and the third party. Oracle is not responsible for: (a) the quality of third-party products or services; or (b) fulfilling any of the terms of the agreement with the third party, including delivery of products or services and warranty obligations related to purchased products or services. Oracle is not responsible for any loss or damage of any sort that you may incur from dealing with any third party.


    Oracle® Database | killexams.com real questions and Pass4sure dumps

    Client Quick Installation Guide

    10g Release 2 (10.2) for Linux on POWER

    B25150-01

    November 2005

    This guide describes how to quickly install Oracle Database Client on Linux on POWER systems. It includes information about the following:

  • Reviewing Information About this Guide

  • Logging In to the System as root

  • Checking the Hardware Requirements

  • Checking the Software Requirements

  • Creating Required Operating System Group and User

  • Creating an Oracle Base Directory

  • Configuring the oracle User's Environment

  • Mounting the Product Disc

  • Installing Oracle Database Client

  • What to Do Next?

  • Documentation Accessibility

  • 1 Reviewing Information About this Guide

    Note:

    This guide describes how to install Oracle Client on a system that does not have any Oracle software installed on it. If there is an existing Oracle software installation on this system, then refer to Oracle Database Client Installation Guide for Linux on POWER for more detailed installation instructions.

    This guide describes how to complete a default installation of Oracle Database Client on a system that does not have any Oracle software installed on it. It describes how to install one of the following installation types:

  • Administrator: Enables applications to connect to an Oracle Database instance on the local system or on a remote system. It also provides tools that enable you to administer Oracle Database.

  • Runtime: Enables applications to connect to an Oracle Database instance on the local system or on a remote system.

  • Instant Client: Enables you to install only the shared libraries required by Oracle Call Interface (OCI), Oracle C++ Call Interface (OCCI), Pro*C, or Java database connectivity (JDBC) OCI applications. This installation type requires much less disk space as compared to the other Oracle Database Client installation types.

  • See Also:

    Oracle Call Interface Programmer's Guide for more information about the Instant Client feature

    This guide does not describe how to install the Custom installation type.

    Where to Get Additional Installation Information

    For more detailed information about installing Oracle Database Client, refer to Oracle Database Client Installation Guide for Linux x86-64.

    This guide is available on the product disc. To access it, use a Web browser to open the welcome.htm file located in the top-level directory of the installation media, and then select the Documentation tab.

    2 Logging In to the System as root

    Before you install Oracle Database Client, you must complete several tasks as the root user. To log in as the root user, complete one of the following procedures:

    Note:

    You must install the software from an X Window System workstation, an X terminal, or a PC or other system with X server software installed.
  • If you are installing the software from an X Window System workstation or X terminal, then:

  • Start a local terminal session, for example, an X terminal (xterm).

  • If you are not installing the software on the local system, then enter the following command to enable the remote host to display X applications on the local X server:

    $ xhost fully_qualified_remote_host_name

    For example:

    $ xhost somehost.us.acme.com
  • If you are not installing the software on the local system, then use the ssh, rlogin, or telnet command to connect to the system where you want to install the software:

    $ telnet fully_qualified_remote_host_name
  • If you are not logged in as the root user, then enter the following command to switch user to root:

    $ su - root password: #
  • If you are installing the software from a PC or other system with X server software installed, then:

    Note:

    If necessary, refer to your X server documentation for more information about completing this procedure. Depending on the X server software that you are using, you may need to complete the tasks in a different order.
  • Start the X server software.

  • Configure the security settings of the X server software to permit remote hosts to display X applications on the local system.

  • Connect to the remote system where you want to install the software and start a terminal session on that system, for example, an X terminal (xterm).

  • If you are not logged in as the root user on the remote system, then enter the following command to switch user to root:

    $ su - root password: #
  • 3 Checking the Hardware Requirements

    The system must meet the following minimum hardware requirements:

  • 256 MB of physical RAM

  • The following table describes the relationship between installed RAM and the configured swap space requirement.

    RAM Swap Space Up to 256 MB 3 times the size of RAM Between 257 MB and 512 MB 2 times the size of RAM Between 513 MB and 726 MB 1.5 times the size of RAM More than 726 MB 0.75 times the size of RAM
  • The minimum client installation TMP space required is 115 MB. The minimum disk space requirement in the /tmp directory depends on the installation type you have selected. The following table lists the minimum disk space requirements for the /tmp directory in each type of installation.

    Installation Type Disk Space Required for the /tmp Directory (MB) Admin 835 Runtime 470 Custom (all components selected) 765 Instant 120
  • Between 34 MB and 820 MB of disk space for the Oracle software, depending on the installation type

  • To ensure that the system meets these requirements, follow these steps:

  • To determine the physical RAM size, enter the following command:

    # grep MemTotal /proc/meminfo

    If the size of the physical RAM installed in the system is less than the specified value, then you must install more memory before continuing.

  • To determine the size of the configured swap space, enter the following command:

    # grep SwapTotal /proc/meminfo

    If necessary, refer to your operating system documentation for information about how to configure additional swap space.

  • To determine the amount of free disk space available in the /tmp directory, enter the following command:

    # df -k /tmp

    If there is less than 400 MB of disk space available in the /tmp directory, then complete one of the following steps:

  • Delete unnecessary files from the /tmp directory to meet the disk space requirement.

  • Set the TEMP and TMPDIR environment variables when setting the oracle user's environment (described later).

  • Extend the file system that contains the /tmp directory. If necessary, contact your system administrator for information about extending file systems.

  • To determine the amount of free disk space available on the system, enter the following command:

    # df -k

    The following table shows the approximate disk space requirements for software files for each installation type.

    Installation Type Requirement for Software Files (MB) Instant Client 130 Administrator 850 Runtime 495 Custom (maximum) 790

    Note:

    If you want to configure only the Instant Client Light component of Instant Client, then you need 34 MB of disk space to store the related files.
  • To determine whether the system architecture can run the software, enter the following command:

    # grep "model name" /proc/cpuinfo

    This command displays the processor type. Verify that the processor architecture matches the Oracle software release that you want to install. If you do not see the expected output, then you cannot install the software on this system.

  • 4 Checking the Software Requirements

    The system must meet the following minimum software requirements.

    Item Requirement Operating system One of the following operating system versions: Kernel version The system must be running the following kernel version (or a later version):

    Red Hat Enterprise Linux 4.0:

    2.6.9-11.EL

    SUSE Linux Enterprise Server 9.0:

    2.6.5-7.191-pseries64

    Packages The following packages (or later versions) must be installed:

    Red Hat Enterprise Linux 4.0:

    Gmake-3.80-5 gcc-3.4.3-22.1 gcc-ppc32-3.4.3-22.1 gcc-c++-3.4.3-22.1 gcc-c++-ppc32-3.4.3-22.1 glibc-2.3.4-2.9 glibc-2.3.4-29 (64-Bit) libgcc-3.4.3-9.EL4 libgcc-3.4.3-9.EL4.ppc64.rp libstdc++-3.4.3-9.EL4 libstdc++-devel-3.4.3-9.EL4 libaio-0.3.103-3 libaio-0.3.103-3 (64-Bit) libaio-devel-0.3.103-3 (64-Bit) compat-libstdc++-33-3.2.3-47.3 binutils-2.15.92.0.2-13

    Red Hat Enterprise Linux 4.0:

    gcc-3.3.3-43.34 gcc-64bit-9-200505240008 gcc-c++-3.3.3-43.34 glibc-2.3.3-98.47 glibc-64bit-9-200506062240 libgcc-3.3.3-43.34 libgcc (64-bit) 9-200505240008 libstdc++-3.3.3-43.34 libstdc++-devel-3.3.3-43.34 libaio-0.3.102-1.2 libaio-64bit-9-200502241152 libaio-devel-0.3.102-1.2 libaio-devel-0.3.102-1.2 (64-bit) Gmake-3.80-184.1 binutils-2.15.90.0.1.1-32.10 binutils-64bit-9-200505240008 Oracle Messaging Gateway Oracle Messaging Gateway supports the integration of Oracle Streams Advanced Queuing (AQ) with the following software:

    IBM WebSphere MQ V5.3, client and server:

    MQSeriesClient MQSeriesServer MQSeriesRuntime C/C++ Runtime Environment Download the IBM XL C/C++ Advanced Edition V7.0.1 for Linux Runtime Environment Component for free without any license requirement from the following link:

    http://www-1.ibm.com/support/docview.wss?rs=2030&context=SSJT9L&context=SSENT9&context=SSEP5D&dc=D400&dc=D410&dc=D420&dc=D430&q1=Run-time+Environment+Component&uid=swg24007906&loc=en_US&cs=utf-8&lang=en

    You must also download and install the XL Optimization Libraries component from this link.

    PL/SQL native compilation, Pro*C/C++, Oracle Call Interface, Oracle C++ Call Interface, Oracle XML Developer's Kit (XDK) The version of GNU C and C++ compilers listed previously for the distribution are supported for use with these products.

    Note: IBM XL C/C++ compiler version 7.0 or later is also supported.

    If the IBM XL C/C++ Advanced Edition V7.0.1 for Linux on POWER compiler is to be used for Oracle user applications then the required version is V7.0.1 or higher. For download information and updates, refer to the following link:

    http://www-306.ibm.com/software/awdtools/xlcpp/features/linux/

    If the IBM XL C/C++ Advanced Edition V7.0.1 for Linux on POWER compiler is installed, the IBM XL C/C++ Advanced Edition V7.0.1 for Linux Runtime Environment Component will be automatically installed.

    Oracle JDBC/OCI Drivers You can use the following optional JDK version with the Oracle JDBC/OCI drivers; however, it is not required for the installation:
  • IBM Java 1.4.2 64-bit (SR1a) or later

  • IBM Java 1.4.2 32-bit (SR1a) or later

  • IBM Java 1.3.1 32-bit (SR8) or later (for SLES 9 only)

  • Note: By default, IBM Java 1.4.2 32-bit is installed with this release.

    See Also:

    If you plan to use GNU Compiler Collection as the primary compiler, then refer to Oracle Database Installation Guide for Linux on POWER for instructions on configuring the primary compiler.

    To ensure that the system meets these requirements:

  • To determine which version of the operating system is installed, enter the following command:

    # cat /etc/issue

    Note:

    Only the distributions and versions listed earlier in this section are supported. Do not install the software on other versions of Linux.
  • To determine whether the required kernel is installed, enter the following command:

    # uname -r

    The following is sample output obtained by running this command on a Red Hat Enterprise Linux 3.0 system:

    2.6.9-11.EL

    In this example, the output shows the kernel version (2.6.9) and errata level (11.EL) on the system.

    If the kernel version does not meet the requirement specified earlier in this section, then contact your operating system vendor for information about obtaining and installing kernel updates.

  • To determine whether the required packages are installed, enter commands similar to the following:

    # rpm -q package_name

    If a package is not installed, or if the version is lower than the required version, then install it from your Linux distribution media or download the required package from your Linux vendor's Web site.

  • 5 Creating Required Operating System Group and User

    The following local operating system group and user must exist on the system:

    To determine if this group and user already exist, and if required, to create them, follow these steps:

  • To determine if the oinstall group exists, enter the following command:

    # more /etc/oraInst.loc

    If the output of this command shows the oinstall group name, then the group already exists.

    If the oraInst.loc file exists, then the output from this command is similar to the following:

    inventory_loc=/u01/app/oracle/oraInventory inst_group=oinstall

    The inst_group parameter shows the name of the Oracle Inventory group (oinstall).

  • If necessary, enter the following command to create the oinstall group:

    # /usr/sbin/groupadd oinstall
  • To determine whether the oracle user exists and belongs to the correct groups, enter the following command:

    # id oracle

    If the oracle user exists, then this command displays information about the groups to which the user belongs. The output should be similar to the following, indicating that oinstall is the primary group:

    uid=440(oracle) gid=200(oinstall) groups=201(dba),202(oper)
  • If necessary, complete one of the following actions:

  • If the oracle user exists, but its primary group is not oinstall, then enter a command similar to the following, where the -g option specifies oinstall as the primary group and the -G option specifies any existing groups to which the oracle user belongs:

    # /usr/sbin/usermod -g oinstall -G dba oracle
  • If the oracle user does not exist, then enter the following command to create it:

    # /usr/sbin/useradd -g oinstall [-G dba] oracle

    This command creates the oracle user and specifies:

  • Enter the following command to set the password of the oracle user:

    # passwd oracle
  • 6 Creating an Oracle Base Directory

    Note:

    You need not perform this procedure if an Oracle base directory already exists on the system. If you determine that the oinstall group exists, then, typically, the Oracle base directory is the parent directory of the Oracle Inventory directory.

    To create the Oracle base directory:

  • Enter the following command to display information about all mounted file systems:

    # df -k

    This command displays information about all the file systems mounted on the system, including:

  • The physical device name

  • The total amount, used amount, and available amount of disk space

  • The mount point directory for that file system

  • From the display, identify either one or two file systems that meet the disk space requirements mentioned earlier in this section.

  • Note the name of the mount point directory for each file system that you identified.

  • Enter commands similar to the following to create the recommended subdirectories in the mount point directory that you identified and set the appropriate owner, group, and permissions on them:

    # mkdir -p /mount_point/app/oracle_sw_owner # chown -R oracle:oinstall /mount_point/app/oracle_sw_owner # chmod -R 775 /mount_point/app/oracle_sw_owner

    For example, if the mount point you identify is /u01 and oracle is the user name of the Oracle software owner, then the recommended Oracle base directory path is as follows:

    /u01/app/oracle
  • When you configure the oracle user's environment, set the ORACLE_BASE environment variable to specify the Oracle base directory that you have created.

  • 7 Configuring the oracle User's Environment

    You run Oracle Universal Installer from the oracle account. However, before you start Oracle Universal Installer, you must configure the environment of the oracle user. To configure the environment, you must:

    To set the oracle user's environment:

  • Start a new terminal session, for example, an X terminal (xterm).

  • Enter the following command to ensure that X Window applications can display on this system:

    $ xhost fully_qualified_remote_host_name
  • Complete one of the following steps:

  • If the terminal session is not connected to the system where you want to install the software, then log in to that system as the oracle user.

  • If the terminal session is connected to the system where you want to install the software, then switch user to oracle:

    $ su - oracle
  • To determine the default shell for the oracle user, enter the following command:

    $ echo $SHELL
  • Open the oracle user's shell startup file in any text editor:

    Note:

    On Red Hat Linux, .bash_profile is the user startup file for the Bash shell.
  • Enter or edit the following line in the shell startup file, specifying a value of 022 for the default file mode creation mask:

    umask 022
  • If the ORACLE_SID, ORACLE_HOME, or ORACLE_BASE environment variable is set in the file, then remove the corresponding lines from the file.

  • Save the file, and exit from the editor.

  • To run the shell startup script, enter the following command:

  • Bash shell:

    $ . ./.bash_profile
  • Bourne or Korn shell:

    $ . ./.profile
  • C shell:

    % source ./.login
  • If you are not installing the software on the local system, then enter a command similar to the following to direct X applications to display on the local system:

  • Bourne, Bash, or Korn shell:

    $ DISPLAY=local_host:0.0 ; export DISPLAY
  • C shell:

    % setenv DISPLAY local_host:0.0
  • In this example, local_host is the host name or IP address of the system that you want to use to display Oracle Universal Installer (your workstation or PC).

  • If you determined that the /tmp directory had insufficient free disk space when checking the hardware requirements, then identify a file system with the required amount of free space and set the TEMP and TMPDIR environment variables as follows:

  • Use the df -k command to identify a suitable file system with sufficient free space.

  • If necessary, enter commands similar to the following to create a temporary directory on the file system that you identified, and set the appropriate permissions on the directory:

    $ su - root # mkdir /mount_point/tmp # chmod a+wr /mount_point/tmp # exit
  • Enter commands similar to the following to set the TEMP and TMPDIR environment variables:

    Bourne, Bash, or Korn shell:

    $ TMP=/mount_point/tmp $ TMPDIR=/mount_point/tmp $ export TEMP TMPDIR

    C shell:

    % setenv TMP /mount_point/tmp % setenv TMPDIR /mount_point/tmp
  • Enter the following commands to ensure that the ORACLE_HOME and TNS_ADMIN environment variables are not set:

  • Bourne, Bash, or Korn shell:

    $ unset ORACLE_HOME $ unset TNS_ADMIN
  • C shell:

    % unsetenv ORACLE_HOME % unsetenv TNS_ADMIN
  • To verify that the environment has been set correctly, enter the following commands:

    $ umask $ env | more

    Verify that the umask command displays a value of 22, 022, or 0022 and the environment variables that you set in this section have the correct values.

  • 8 Mounting the Product Disc

    On most Linux systems, the product disc mounts automatically when you insert it into the drive. If the disc does not mount automatically, follow these steps to mount it:

  • Switch user to root:

    $ su - root
  • If necessary, enter a command similar to the following to eject the currently mounted disc, then remove it from the drive:

  • Red Hat:

    # eject /mnt/dvd
  • SUSE:

    # eject /media/dvd
  • In these examples, /mnt/dvd and /media/dvd are the mount point directories for the disc drive.

  • Insert the disc into the disc drive.

  • To verify that the disc mounted automatically, enter a command similar to the following:

  • Red Hat:

    $ ls /mnt/dvd
  • SUSE:

    $ ls /media/dvd
  • If this command fails to display the contents of the disc, then enter a command similar to the following:

    In these examples, /mnt/dvd and /media/dvd are the mount point directories for the disc drive.

  • 9 Installing Oracle Database Client

    After configuring the oracle user's environment, start Oracle Universal Installer and install the Oracle software as follows:

  • To start Oracle Universal Installer, enter the following command:

    $ /mount_point/client/runInstaller

    If Oracle Universal Installer does not start, then refer to Oracle Database Client Installation Guide for Linux x86-64 for information about how to troubleshoot X display problems.

  • The following table describes the recommended action for each Oracle Universal Installer screen. Use the following guidelines to complete the installation:

  • If you need more assistance, or if you want to choose an option that is not a default, then click Help for additional information.

  • If you encounter errors while installing or linking the software, then refer to for information about troubleshooting.

  • Note:

    If you have completed the tasks listed previously, then you can complete the installation by choosing the default values on most screens. Screen Recommended Action Welcome Click Next. Select Installation Type Select InstantClient, Administrator, or Runtime. Then, click Next. Specify Home Details Specify the name and directory path of the Oracle home. Product-Specific Prerequisite Checks Verify that all of the prerequisite checks have succeeded, and then click Next.

    Oracle Universal Installer checks the system to verify that it is configured correctly to run Oracle software. If you have completed all of the preinstallation steps in this guide, then all of the checks should pass.

    If a check fails, then review the cause of the failure listed for that check on the screen. If possible, rectify the problem and rerun the check. Alternatively, if you are satisfied that your system meets the requirements, then you can select the check box for the failed check to manually verify the requirement.

    Summary Review the information displayed on this screen, and then click Install. Install This screen displays status information while the product is being installed. Configuration Assistants This screen is displayed only if you select Administrator or Runtime on the Select Installation type screen.

    This screen displays status information for the Oracle Net Configuration Assistant that configures Oracle Net. When the message is displayed at the end of this process, click OK to continue.

    Oracle Net Configuration Assistant: Welcome This screen is displayed only if you select Administrator or Runtime on the Select Installation Type screen.

    Review the information on this screen, and then click Next.

    The Oracle Net Configuration Assistant configures the easy connect naming method. For more information about this naming method, click Help.

    Oracle Net Configuration Assistant: Done Click Finish to continue. Execute Configuration Scripts When prompted, read the instructions and then run the script mentioned on this screen. Click OK to continue. End of Installation To exit from Oracle Universal Installer, click Exit, and then click Yes. 10 What to Do Next?

    After you have successfully installed Oracle Client, refer to Oracle Database Client Installation Guide for Linux x86-64 for information about required and optional postnstallation steps.

    11 Documentation Accessibility

    Our goal is to make Oracle products, services, and supporting documentation accessible, with good usability, to the disabled community. To that end, their documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Accessibility standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that their documentation can be accessible to all of their customers. For more information, visit the Oracle Accessibility Program Web site at

    http://www.oracle.com/accessibility/

    Accessibility of Code Examples in Documentation

    Screen readers may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, some screen readers may not always read a line of text that consists solely of a bracket or brace.

    Accessibility of Links to External Web Sites in Documentation

    This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.

    TTY Access to Oracle Support Services

    Oracle provides dedicated Text Telephone (TTY) access to Oracle Support Services within the United States of America 24 hours a day, seven days a week. For TTY support, call 800.446.2398.

    Oracle Database Client Quick Installation Guide, 10g Release 2 (10.2) for Linux on POWER

    B25150-01

    Copyright © 2005, Oracle. All rights reserved.

    The Programs (which include both the software and documentation) contain proprietary information; they are provided under a license agreement containing restrictions on use and disclosure and are also protected by copyright, patent, and other intellectual and industrial property laws. Reverse engineering, disassembly, or decompilation of the Programs, except to the extent required to obtain interoperability with other independently created software or as specified by law, is prohibited.

    The information contained in this document is subject to change without notice. If you find any problems in the documentation, please report them to us in writing. This document is not warranted to be error-free. Except as may be expressly permitted in your license agreement for these Programs, no part of these Programs may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose.

    If the Programs are delivered to the United States Government or anyone licensing or using the Programs on behalf of the United States Government, the following notice is applicable:

    U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the Programs, including documentation and technical data, shall be subject to the licensing restrictions set forth in the applicable Oracle license agreement, and, to the extent applicable, the additional rights set forth in FAR 52.227-19, Commercial Computer Software—Restricted Rights (June 1987). Oracle Corporation, 500 Oracle Parkway, Redwood City, CA 94065

    The Programs are not intended for use in any nuclear, aviation, mass transit, medical, or other inherently dangerous applications. It shall be the licensee's responsibility to take all appropriate fail-safe, backup, redundancy and other measures to ensure the safe use of such applications if the Programs are used for such purposes, and they disclaim liability for any damages caused by such use of the Programs.

    Oracle, JD Edwards, PeopleSoft, and Retek are registered trademarks of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

    The Programs may provide links to Web sites and access to content, products, and services from third parties. Oracle is not responsible for the availability of, or any content provided on, third-party Web sites. You bear all risks associated with the use of such content. If you choose to purchase any products or services from a third party, the relationship is directly between you and the third party. Oracle is not responsible for: (a) the quality of third-party products or services; or (b) fulfilling any of the terms of the agreement with the third party, including delivery of products or services and warranty obligations related to purchased products or services. Oracle is not responsible for any loss or damage of any sort that you may incur from dealing with any third party.



    Direct Download of over 5500 Certification Exams

    3COM [8 Certification Exam(s) ]
    AccessData [1 Certification Exam(s) ]
    ACFE [1 Certification Exam(s) ]
    ACI [3 Certification Exam(s) ]
    Acme-Packet [1 Certification Exam(s) ]
    ACSM [4 Certification Exam(s) ]
    ACT [1 Certification Exam(s) ]
    Admission-Tests [13 Certification Exam(s) ]
    ADOBE [93 Certification Exam(s) ]
    AFP [1 Certification Exam(s) ]
    AICPA [2 Certification Exam(s) ]
    AIIM [1 Certification Exam(s) ]
    Alcatel-Lucent [13 Certification Exam(s) ]
    Alfresco [1 Certification Exam(s) ]
    Altiris [3 Certification Exam(s) ]
    Amazon [2 Certification Exam(s) ]
    American-College [2 Certification Exam(s) ]
    Android [4 Certification Exam(s) ]
    APA [1 Certification Exam(s) ]
    APC [2 Certification Exam(s) ]
    APICS [2 Certification Exam(s) ]
    Apple [69 Certification Exam(s) ]
    AppSense [1 Certification Exam(s) ]
    APTUSC [1 Certification Exam(s) ]
    Arizona-Education [1 Certification Exam(s) ]
    ARM [1 Certification Exam(s) ]
    Aruba [6 Certification Exam(s) ]
    ASIS [2 Certification Exam(s) ]
    ASQ [3 Certification Exam(s) ]
    ASTQB [8 Certification Exam(s) ]
    Autodesk [2 Certification Exam(s) ]
    Avaya [96 Certification Exam(s) ]
    AXELOS [1 Certification Exam(s) ]
    Axis [1 Certification Exam(s) ]
    Banking [1 Certification Exam(s) ]
    BEA [5 Certification Exam(s) ]
    BICSI [2 Certification Exam(s) ]
    BlackBerry [17 Certification Exam(s) ]
    BlueCoat [2 Certification Exam(s) ]
    Brocade [4 Certification Exam(s) ]
    Business-Objects [11 Certification Exam(s) ]
    Business-Tests [4 Certification Exam(s) ]
    CA-Technologies [21 Certification Exam(s) ]
    Certification-Board [10 Certification Exam(s) ]
    Certiport [3 Certification Exam(s) ]
    CheckPoint [41 Certification Exam(s) ]
    CIDQ [1 Certification Exam(s) ]
    CIPS [4 Certification Exam(s) ]
    Cisco [318 Certification Exam(s) ]
    Citrix [48 Certification Exam(s) ]
    CIW [18 Certification Exam(s) ]
    Cloudera [10 Certification Exam(s) ]
    Cognos [19 Certification Exam(s) ]
    College-Board [2 Certification Exam(s) ]
    CompTIA [76 Certification Exam(s) ]
    ComputerAssociates [6 Certification Exam(s) ]
    Consultant [2 Certification Exam(s) ]
    Counselor [4 Certification Exam(s) ]
    CPP-Institue [2 Certification Exam(s) ]
    CPP-Institute [1 Certification Exam(s) ]
    CSP [1 Certification Exam(s) ]
    CWNA [1 Certification Exam(s) ]
    CWNP [13 Certification Exam(s) ]
    Dassault [2 Certification Exam(s) ]
    DELL [9 Certification Exam(s) ]
    DMI [1 Certification Exam(s) ]
    DRI [1 Certification Exam(s) ]
    ECCouncil [21 Certification Exam(s) ]
    ECDL [1 Certification Exam(s) ]
    EMC [129 Certification Exam(s) ]
    Enterasys [13 Certification Exam(s) ]
    Ericsson [5 Certification Exam(s) ]
    ESPA [1 Certification Exam(s) ]
    Esri [2 Certification Exam(s) ]
    ExamExpress [15 Certification Exam(s) ]
    Exin [40 Certification Exam(s) ]
    ExtremeNetworks [3 Certification Exam(s) ]
    F5-Networks [20 Certification Exam(s) ]
    FCTC [2 Certification Exam(s) ]
    Filemaker [9 Certification Exam(s) ]
    Financial [36 Certification Exam(s) ]
    Food [4 Certification Exam(s) ]
    Fortinet [13 Certification Exam(s) ]
    Foundry [6 Certification Exam(s) ]
    FSMTB [1 Certification Exam(s) ]
    Fujitsu [2 Certification Exam(s) ]
    GAQM [9 Certification Exam(s) ]
    Genesys [4 Certification Exam(s) ]
    GIAC [15 Certification Exam(s) ]
    Google [4 Certification Exam(s) ]
    GuidanceSoftware [2 Certification Exam(s) ]
    H3C [1 Certification Exam(s) ]
    HDI [9 Certification Exam(s) ]
    Healthcare [3 Certification Exam(s) ]
    HIPAA [2 Certification Exam(s) ]
    Hitachi [30 Certification Exam(s) ]
    Hortonworks [4 Certification Exam(s) ]
    Hospitality [2 Certification Exam(s) ]
    HP [750 Certification Exam(s) ]
    HR [4 Certification Exam(s) ]
    HRCI [1 Certification Exam(s) ]
    Huawei [21 Certification Exam(s) ]
    Hyperion [10 Certification Exam(s) ]
    IAAP [1 Certification Exam(s) ]
    IAHCSMM [1 Certification Exam(s) ]
    IBM [1532 Certification Exam(s) ]
    IBQH [1 Certification Exam(s) ]
    ICAI [1 Certification Exam(s) ]
    ICDL [6 Certification Exam(s) ]
    IEEE [1 Certification Exam(s) ]
    IELTS [1 Certification Exam(s) ]
    IFPUG [1 Certification Exam(s) ]
    IIA [3 Certification Exam(s) ]
    IIBA [2 Certification Exam(s) ]
    IISFA [1 Certification Exam(s) ]
    Intel [2 Certification Exam(s) ]
    IQN [1 Certification Exam(s) ]
    IRS [1 Certification Exam(s) ]
    ISA [1 Certification Exam(s) ]
    ISACA [4 Certification Exam(s) ]
    ISC2 [6 Certification Exam(s) ]
    ISEB [24 Certification Exam(s) ]
    Isilon [4 Certification Exam(s) ]
    ISM [6 Certification Exam(s) ]
    iSQI [7 Certification Exam(s) ]
    ITEC [1 Certification Exam(s) ]
    Juniper [64 Certification Exam(s) ]
    LEED [1 Certification Exam(s) ]
    Legato [5 Certification Exam(s) ]
    Liferay [1 Certification Exam(s) ]
    Logical-Operations [1 Certification Exam(s) ]
    Lotus [66 Certification Exam(s) ]
    LPI [24 Certification Exam(s) ]
    LSI [3 Certification Exam(s) ]
    Magento [3 Certification Exam(s) ]
    Maintenance [2 Certification Exam(s) ]
    McAfee [8 Certification Exam(s) ]
    McData [3 Certification Exam(s) ]
    Medical [69 Certification Exam(s) ]
    Microsoft [374 Certification Exam(s) ]
    Mile2 [3 Certification Exam(s) ]
    Military [1 Certification Exam(s) ]
    Misc [1 Certification Exam(s) ]
    Motorola [7 Certification Exam(s) ]
    mySQL [4 Certification Exam(s) ]
    NBSTSA [1 Certification Exam(s) ]
    NCEES [2 Certification Exam(s) ]
    NCIDQ [1 Certification Exam(s) ]
    NCLEX [2 Certification Exam(s) ]
    Network-General [12 Certification Exam(s) ]
    NetworkAppliance [39 Certification Exam(s) ]
    NI [1 Certification Exam(s) ]
    NIELIT [1 Certification Exam(s) ]
    Nokia [6 Certification Exam(s) ]
    Nortel [130 Certification Exam(s) ]
    Novell [37 Certification Exam(s) ]
    OMG [10 Certification Exam(s) ]
    Oracle [279 Certification Exam(s) ]
    P&C [2 Certification Exam(s) ]
    Palo-Alto [4 Certification Exam(s) ]
    PARCC [1 Certification Exam(s) ]
    PayPal [1 Certification Exam(s) ]
    Pegasystems [12 Certification Exam(s) ]
    PEOPLECERT [4 Certification Exam(s) ]
    PMI [15 Certification Exam(s) ]
    Polycom [2 Certification Exam(s) ]
    PostgreSQL-CE [1 Certification Exam(s) ]
    Prince2 [6 Certification Exam(s) ]
    PRMIA [1 Certification Exam(s) ]
    PsychCorp [1 Certification Exam(s) ]
    PTCB [2 Certification Exam(s) ]
    QAI [1 Certification Exam(s) ]
    QlikView [1 Certification Exam(s) ]
    Quality-Assurance [7 Certification Exam(s) ]
    RACC [1 Certification Exam(s) ]
    Real-Estate [1 Certification Exam(s) ]
    RedHat [8 Certification Exam(s) ]
    RES [5 Certification Exam(s) ]
    Riverbed [8 Certification Exam(s) ]
    RSA [15 Certification Exam(s) ]
    Sair [8 Certification Exam(s) ]
    Salesforce [5 Certification Exam(s) ]
    SANS [1 Certification Exam(s) ]
    SAP [98 Certification Exam(s) ]
    SASInstitute [15 Certification Exam(s) ]
    SAT [1 Certification Exam(s) ]
    SCO [10 Certification Exam(s) ]
    SCP [6 Certification Exam(s) ]
    SDI [3 Certification Exam(s) ]
    See-Beyond [1 Certification Exam(s) ]
    Siemens [1 Certification Exam(s) ]
    Snia [7 Certification Exam(s) ]
    SOA [15 Certification Exam(s) ]
    Social-Work-Board [4 Certification Exam(s) ]
    SpringSource [1 Certification Exam(s) ]
    SUN [63 Certification Exam(s) ]
    SUSE [1 Certification Exam(s) ]
    Sybase [17 Certification Exam(s) ]
    Symantec [134 Certification Exam(s) ]
    Teacher-Certification [4 Certification Exam(s) ]
    The-Open-Group [8 Certification Exam(s) ]
    TIA [3 Certification Exam(s) ]
    Tibco [18 Certification Exam(s) ]
    Trainers [3 Certification Exam(s) ]
    Trend [1 Certification Exam(s) ]
    TruSecure [1 Certification Exam(s) ]
    USMLE [1 Certification Exam(s) ]
    VCE [6 Certification Exam(s) ]
    Veeam [2 Certification Exam(s) ]
    Veritas [33 Certification Exam(s) ]
    Vmware [58 Certification Exam(s) ]
    Wonderlic [2 Certification Exam(s) ]
    Worldatwork [2 Certification Exam(s) ]
    XML-Master [3 Certification Exam(s) ]
    Zend [6 Certification Exam(s) ]





    References :


    Dropmark : http://killexams.dropmark.com/367904/11775650
    Wordpress : http://wp.me/p7SJ6L-1xG
    Issu : https://issuu.com/trutrainers/docs/000-374
    Dropmark-Text : http://killexams.dropmark.com/367904/12368394
    Blogspot : http://killexamsbraindump.blogspot.com/2017/11/review-000-374-real-question-and.html
    RSS Feed : http://feeds.feedburner.com/Review000-374RealQuestionAndAnswersBeforeYouTakeTest
    Box.net : https://app.box.com/s/gvovwqzekjprbtve3lycc5ydayp78wbh
    zoho.com : https://docs.zoho.com/file/64ypud6ad4f784be24091be58dbf04f9472ab






    Back to Main Page





    Killexams exams | Killexams certification | Pass4Sure questions and answers | Pass4sure | pass-guaratee | best test preparation | best training guides | examcollection | killexams | killexams review | killexams legit | kill example | kill example journalism | kill exams reviews | kill exam ripoff report | review | review quizlet | review login | review archives | review sheet | legitimate | legit | legitimacy | legitimation | legit check | legitimate program | legitimize | legitimate business | legitimate definition | legit site | legit online banking | legit website | legitimacy definition | pass 4 sure | pass for sure | p4s | pass4sure certification | pass4sure exam | IT certification | IT Exam | certification material provider | pass4sure login | pass4sure exams | pass4sure reviews | pass4sure aws | pass4sure security | pass4sure cisco | pass4sure coupon | pass4sure dumps | pass4sure cissp | pass4sure braindumps | pass4sure test | pass4sure torrent | pass4sure download | pass4surekey | pass4sure cap | pass4sure free | examsoft | examsoft login | exams | exams free | examsolutions | exams4pilots | examsoft download | exams questions | examslocal | exams practice |

    www.pass4surez.com | www.killcerts.com | www.search4exams.com | http://smresidences.com.ph/